Eye & Eye. Jaw & Eye. Jaw & Jaw.
Failure to read, understand, and follow manufactures instructions may cause death or serious injury.
Turnbuckles
Eye & Eye. Jaw & Eye. Jaw & Jaw.
Failure to read, understand, and follow manufactures instructions may cause
death or serious injury.
Eye & Eye
THE CROSBY
GROUP
HG-226
EYE & EYE
Turnbuckle eyes
are forged elongated, by design, to maximize easy attachment in system and minimize stress
in the eye.
For turnbuckle sizes 1/4" through 2-1/2", a shackle one size smaller can be
revved through eye.
Modified UNJ thread on end fittings for improved fatigue properties. Body has UNC threads.
End fittings are Quenched and Tempered, bodies heat treated by normalizing.
Lock Nuts available for all sizes
Hot Dip galvanized steel.
Fatigue Rated
TURNBUCKLES
RECOMMENDED FOR STRAIGHT OR IN-LINE PULL ONLY.
Meets the
performance requirements of Federal Specifications FF-T-791b, Type 1, Form 1 — CLASS
4,
Except for those provisions required of the contractor
Thread |
Stock No. |
Working |
Weight |
Dimensions |
||||||||
A |
J |
K |
M |
N |
R |
S |
X |
BB |
||||
1/4 x 4 |
1031252 |
500 |
.26 |
.25 |
11.80 |
7.80 |
12.25 |
8.25 |
.78 |
.34 |
1.75 |
4.00 |
5/16 x 4-1/2 |
1031270 |
800 |
.45 |
.31 |
13.56 |
9.06 |
14.12 |
9.62 |
.94 |
.44 |
2.09 |
4.50 |
3/8 x 6 |
1031298 |
1200 |
.76 |
.38 |
17.47 |
11.47 |
18.16 |
12.16 |
1.12 |
.53 |
2.52 |
6.00 |
1/2 x 6 |
1031314 |
2200 |
1.54 |
.50 |
20.08 |
13.08 |
20.96 |
13.96 |
1.44 |
.72 |
3.23 |
6.00 |
1/2 x 9 |
1031332 |
2200 |
1.13 |
.50 |
26.08 |
16.08 |
26.96 |
16.96 |
1.44 |
.72 |
3.23 |
9.00 |
1/2 x 12 |
1031350 |
2200 |
2.14 |
.50 |
32.08 |
19.08 |
32.96 |
19.96 |
1.44 |
.72 |
3.23 |
12.00 |
5/8 x 6 |
1031378 |
3500 |
3.28 |
.63 |
21.93 |
14.68 |
22.93 |
15.68 |
1.75 |
.88 |
3.90 |
6.00 |
5/8 x 9 |
1031396 |
3500 |
2.83 |
.63 |
27.93 |
17.68 |
28.93 |
18.68 |
1.75 |
.88 |
3.90 |
9.00 |
5/8 x 12 |
1031412 |
3500 |
3.42 |
.63 |
33.93 |
20.68 |
34.93 |
21.68 |
1.75 |
.88 |
3.90 |
12.00 |
3/4 x 6 |
1031430 |
5200 |
3.79 |
.75 |
23.88 |
16.38 |
25.12 |
17.62 |
2.09 |
1.00 |
4.69 |
6.00 |
3/4 x 9 |
1031458 |
5200 |
4.61 |
.75 |
29.88 |
19.38 |
31.12 |
20.62 |
2.09 |
1.00 |
4.69 |
9.00 |
3/4 x 12 |
1031476 |
5200 |
5.48 |
.75 |
35.88 |
22.38 |
37.12 |
23.62 |
2.09 |
1.00 |
4.69 |
12.00 |
3/4 x 18 |
1031494 |
5200 |
7.19 |
.75 |
47.88 |
28.38 |
49.12 |
29.62 |
2.09 |
1.00 |
4.69 |
18.00 |
7/8 x 12 |
1031519 |
7200 |
7.22 |
.88 |
37.07 |
23.32 |
38.57 |
24.82 |
2.38 |
1.25 |
5.10 |
12.00 |
7/8 x 18 |
1031537 |
7200 |
9.95 |
.88 |
49.07 |
29.32 |
50.57 |
30.82 |
2.38 |
1.25 |
5.10 |
18.00 |
1 x 6 |
1031555 |
10000 |
9.04 |
1.00 |
27.97 |
19.97 |
29.72 |
21.72 |
3.00 |
1.44 |
6.36 |
6.00 |
1 x 12 |
1031573 |
10000 |
11.50 |
1.00 |
39.97 |
25.97 |
41.97 |
27.72 |
3.00 |
1.44 |
6.36 |
12.00 |
1 x 18 |
1031591 |
10000 |
14.00 |
1.00 |
51.97 |
31.97 |
53.72 |
33.72 |
3.00 |
1.44 |
6.36 |
18.00 |
1 x 24 |
1031617 |
10000 |
17.25 |
1.00 |
63.97 |
37.97 |
65.72 |
39.72 |
3.00 |
1.44 |
6.36 |
24.00 |
* Proof Load is 2.5 times the Working Load Limit. Ultimate Load is 5 times the Working Load Limit
BREWER - TITCHENER
780 - G EYE TO EYE
Meets design requirements of federal specifications, FF-T791,
Type 1, Class 4.
Drop forged carbon steel with galvanized finish.
Galvanizing meets ASTM A-153 specifications.
Safety factor is 5 to 1.
Weld less.
RECOMMENDED FOR STRAIGHT OR IN LINE PULL ONLY
|
Thread Diameter (A) & Take up (B) |
Working load limit* (lbs.) |
Weight per 100 (lbs.) |
Dimension. (in.) | ||||
| E | G | H | J | W | |||
| 1/4" x 4" | 500 | 27 | 1 9/16" | 3/8" | 7/32" | 25/32" | 7 7/8" |
| 5/16" x 4 1/2" | 800 | 45 | 2" | 15/32" | 9/32" | 15/16" | 9 7/16" |
| 3/8 x 6" | 1200 | 84 | 2 11/32" | 9/16" | 11/32" | 1 1/8" | 11 13/6" |
| 1/2 x 6" | 220 | 156 | 2 31/32" | 3/4" | 7/16" | 1 7/16" | 13 7/16" |
| 1/2 x 9" | 2200 | 198 | 2 31/32" | 3/4" | 7/16" | 1 7/16" | 16 7/16" |
| 1/2 x 12" | 2200 | 246 | 2 31/32" | 3/4" | 7/16" | 1 7/16" | 19 7/16" |
| 5/8 x 6" | 3500 | 256 | 3 1/2" | 29/32" | 1/2" | 1 3/4" | 14 7/8" |
| 5/8 x 9" | 3500 | 310 | 3 1/2" | 29/32" | 1/2" | 1 3/4" | 17 7/8" |
| 5/8 x 12" | 3500 | 350 | 3 1/2" | 29/32" | 1/2" | 1 3/4" | 20 7/8" |
| 5/8 x 18" | 3500 | 480 | 3 1/2" | 29/32" | 1/2" | 1 3/4" | 26 7/8" |
| 3/4 x 6" | 5200 | 380 | 4 1/4" | 1 1/32" | 5/8" | 2 1/8" | 16 3/4" |
| 3/4 x 9" | 5200 | 458 | 4 1/4" | 1 1/32" | 5/8" | 2 1/8" | 19 3/4" |
| 3/4 x 12" | 5200 | 574 | 4 1/4" | 1 1/32" | 5/8" | 2 1/8" | 22 3/4" |
| 3/4 x 18" | 5200 | 700 | 4 1/4" | 1 1/32" | 5/8" | 2 1/8" | 28 3/4" |
| 3/4 x 24" | 5200 | 860 | 4 1/4" | 1 1/32" | 5/8" | 2 1/8" | 34 3/4" |
| 7/8 x 12" | 7200 | 791 | 4 3/4" | 1 9/32" | 3/4" | 2 3/8" | 24 1/8" |
| 7/8 x 18" | 7200 | 1050 | 4 3/4" | 1 9/32" | 3/4" | 2 3/8" | 30 1/8" |
| 1 x 6" | 10.000 | 800 | 5 3/4" | 1 15/32" | 7/8" | 3" | 20 1/2" |
| 1 x 12" | 10.000 | 1170 | 5 3/4" | 1 15/32" | 7/8" | 3" | 26 1/2" |
| 1 x 18" | 10.000 | 1400 | 5 3/4" | 1 15/32" | 7/8" | 3" | 32 1/2" |
| 1x 24" | 10.000 | 1600 | 5 3/4" | 1 15/32" | 7/8" | 3" | 38 1/2" |
Forged jaw ends are fitted with bolts and nuts 1/4" - 5/8", pins and cotters on 3/4 - 2 3/4" sizes.
End fittings are quenched and tempered, bodies heat treated by normalizing.
Turnbuckle eyes are forged and elongated to minimize stress in eye.
Hot dip galvanized steel.RECOMMENDED FOR STRAIGHT OR IN LINE PULL ONLY.
Meets the performance requirements of Federal Specifications FF-T-791b, Type 1, Form 1 — CLASS 8,
Except for those provisions required of the contractor.
Thread |
Stock No. |
Working |
Weight Each |
Dimensions |
|||||||||||
A |
B |
E |
G |
J |
K |
M |
N |
R |
S |
X |
BB |
||||
1/4 x 4 |
1031877 |
500 |
.30 |
.25 |
.41 |
1.58 |
.62 |
11.35 |
7.35 |
12.07 |
8.07 |
.78 |
.34 |
1.75 |
4.00 |
5/16 x 4-1/2 |
1031895 |
800 |
.50 |
.31 |
.47 |
1.98 |
.87 |
13.71 |
8.71 |
14.01 |
9.51 |
.94 |
.44 |
2.09 |
4.50 |
3/8 x 6 |
1031911 |
1200 |
.80 |
.38 |
.50 |
2.12 |
.87 |
16.81 |
10.81 |
17.77 |
11.77 |
1.12 |
.53 |
2.52 |
6.00 |
1/2 x 6 |
1031939 |
2200 |
1.51 |
.50 |
.63 |
2.75 |
1.06 |
19.29 |
12.29 |
20.48 |
13.48 |
1.44 |
.72 |
3.23 |
6.00 |
1/2 x 9 |
1031957 |
2200 |
1.71 |
.50 |
.63 |
2.75 |
1.06 |
25.29 |
15.29 |
26.48 |
16.48 |
1.44 |
.72 |
3.23 |
9.00 |
1/2 x 12 |
1031975 |
2200 |
2.08 |
.50 |
.63 |
2.75 |
1.06 |
31.29 |
18.29 |
32.48 |
19.48 |
1.44 |
.72 |
3.23 |
12.00 |
5/8 x 6 |
1031993 |
3500 |
2.35 |
.63 |
.75 |
3.50 |
1.31 |
20.99 |
13.74 |
22.53 |
15.28 |
1.75 |
.88 |
3.90 |
6.00 |
5/8 x 9 |
1032019 |
3500 |
3.17 |
.63 |
.75 |
3.50 |
1.31 |
26.99 |
16.74 |
28.53 |
18.28 |
1.75 |
.88 |
3.90 |
9.00 |
5/8 x 12 |
1032037 |
3500 |
3.61 |
.63 |
.75 |
3.50 |
1.31 |
32.99 |
19.74 |
34.53 |
21.28 |
1.75 |
.88 |
3.90 |
12.00 |
3/4 x 6 |
1032055 |
5200 |
4.00 |
.75 |
.94 |
4.18 |
1.50 |
22.69 |
15.19 |
24.61 |
17.11 |
2.09 |
1.00 |
4.69 |
6.00 |
3/4 x 9 |
1032073 |
5200 |
4.75 |
.75 |
.94 |
4.18 |
1.50 |
28.69 |
18.19 |
30.61 |
20.11 |
2.09 |
1.00 |
4.69 |
9.00 |
3/4 x 12 |
1032091 |
5200 |
5.93 |
.75 |
.94 |
4.18 |
1.50 |
34.69 |
21.19 |
36.61 |
23.11 |
2.09 |
1.00 |
4.69 |
12.00 |
3/4 x 18 |
1032117 |
5200 |
7.00 |
.75 |
.94 |
4.18 |
1.50 |
46.69 |
27.19 |
48.61 |
29.11 |
2.09 |
1.00 |
4.69 |
18.00 |
7/8 x 12 |
1032135 |
7200 |
8.36 |
.88 |
1.13 |
4.85 |
1.75 |
36.09 |
22.34 |
38.32 |
24.57 |
2.38 |
1.25 |
5.10 |
12.00 |
7/8 x 18 |
1032153 |
7200 |
9.75 |
.88 |
1.13 |
4.85 |
1.75 |
48.09 |
28.34 |
50.32 |
30.57 |
2.38 |
1.25 |
5.10 |
18.00 |
1 x 6 |
1032171 |
10000 |
8.92 |
1.00 |
1.19 |
5.53 |
2.06 |
26.34 |
18.34 |
28.89 |
20.89 |
3.00 |
1.44 |
6.36 |
6.00 |
1 x 12 |
1032199 |
10000 |
11.20 |
1.00 |
1.19 |
5.53 |
2.06 |
38.34 |
24.34 |
40.89 |
26.89 |
3.00 |
1.44 |
6.36 |
12.00 |
1 x 18 |
1032215 |
10000 |
13.30 |
1.00 |
1.19 |
5.53 |
2.06 |
50.34 |
30.34 |
52.89 |
32.89 |
3.00 |
1.44 |
6.36 |
18.00 |
1 x 24 |
1032233 |
10000 |
17.00 |
1.00 |
1.19 |
5.53 |
2.06 |
62.34 |
36.34 |
64.89 |
38.89 |
3.00 |
1.44 |
6.36 |
24.00 |
Forged jaw ends
are fitted with bolts and nuts for 1/4" through 5/8", and pins and cotters on
3/4" through 2-3/4" sizes.
End fittings are Quenched and Tempered, bodies heat treated by normalizing.
Modified UNJ thread on end fittings for improved fatigue properties.
Lock Nuts available for all sizes
Hot Dip galvanized steel.
Body has UNC threads.
Fatigue Rated
TURNBUCKLES RECOMMENDED FOR STRAIGHT OR IN-LINE PULL ONLY.
Meets the performance requirements of Federal Specifications FF-T-791b,
Type 1, Form 1 — CLASS 7,
Except for those provisions required of the contractor.
Thread |
Stock
No. |
Working
|
Weight
|
Dimensions |
||||||||
A |
B |
E |
G |
J |
K |
M |
N |
BB |
||||
1/4 x 4 |
1032493 |
500 |
.36 |
.25 |
.41 |
1.58 |
.62 |
10.90 |
6.90 |
11.90 |
7.90 |
4.00 |
5/16x41/2 |
1032518 |
800 |
.52 |
.31 |
.47 |
1.98 |
.87 |
12.36 |
8.36 |
13.90 |
9.40 |
4.50 |
3/8 x 6 |
1032536 |
1200 |
.81 |
.38 |
.50 |
2.12 |
.87 |
16.14 |
10.14 |
17.38 |
11.38 |
6.00 |
1/2 x 6 |
1032554 |
2200 |
1.56 |
.50 |
.63 |
2.75 |
1.06 |
18.50 |
11.50 |
20.00 |
13.00 |
6.00 |
1/2 x 9 |
1032572 |
2200 |
1.74 |
.50 |
.63 |
2.75 |
1.06 |
24.50 |
14.50 |
26.00 |
16.00 |
9.00 |
1/2 x 12 |
1032590 |
2200 |
2.40 |
.50 |
.63 |
2.75 |
1.06 |
30.50 |
17.50 |
32.00 |
19.00 |
12.00 |
5/8 x 6 |
1032616 |
3500 |
2.72 |
.63 |
.75 |
3.50 |
1.31 |
20.05 |
12.80 |
22.13 |
14.88 |
6.00 |
5/8 x 9 |
1032634 |
3500 |
3.43 |
.63 |
.75 |
3.50 |
1.31 |
26.05 |
15.80 |
28.13 |
17.88 |
9.00 |
5/8 x 12 |
1032652 |
3500 |
3.91 |
.63 |
.75 |
3.50 |
1.31 |
32.05 |
18.80 |
34.13 |
20.88 |
12.00 |
3/4 x 6 |
1032670 |
5200 |
4.11 |
.75 |
.94 |
4.18 |
1.50 |
21.50 |
14.00 |
24.10 |
16.60 |
6.00 |
3/4 x 9 |
1032698 |
5200 |
5.46 |
.75 |
.94 |
4.18 |
1.50 |
27.50 |
17.00 |
30.10 |
19.60 |
9.00 |
3/4 x 12 |
1032714 |
5200 |
6.43 |
.75 |
.94 |
4.18 |
1.50 |
33.50 |
20.00 |
36.10 |
22.60 |
12.00 |
3/4 x 18 |
1032732 |
5200 |
8.07 |
.75 |
.94 |
4.18 |
1.50 |
45.50 |
26.00 |
48.10 |
28.60 |
18.00 |
7/8 x 12 |
1032750 |
7200 |
8.17 |
.88 |
1.13 |
4.85 |
1.75 |
35.11 |
21.36 |
38.07 |
24.32 |
12.00 |
7/8 x 18 |
1032778 |
7200 |
10.78 |
.88 |
1.13 |
4.85 |
1.75 |
47.11 |
27.36 |
50.07 |
30.32 |
18.00 |
1 x 6 |
1032796 |
10000 |
10.18 |
1.00 |
1.19 |
5.53 |
2.06 |
24.72 |
16.72 |
28.06 |
20.06 |
6.00 |
1 x 12 |
1032812 |
10000 |
12.52 |
1.00 |
1.19 |
5.53 |
2.06 |
36.72 |
22.72 |
40.06 |
26.06 |
12.00 |
1 x 18 |
1032830 |
10000 |
15.14 |
1.00 |
1.19 |
5.53 |
2.06 |
48.72 |
28.72 |
52.06 |
32.06 |
18.00 |
1 x 24 |
1032858 |
10000 |
18.08 |
1.00 |
1.19 |
5.53 |
2.06 |
60.72 |
34.72 |
64.06 |
38.06 |
24.00 |
In accordance with good rigging and
maintenance practices
All rigging equipment and hardware should be inspected periodically
for wear, abuse and general adequacy.
Visitors Notes Links Pictures
If you have something that this page is missing or have some good ideas how to improve this page feel free to contact me at Peter@Rigging.net
Page maintained by Peter@Rigging.net . Copyright. Created: 7/24/96 Updated: 9/21/01
